Buffalo TeraStation 5020 User Manual page 130

Chapter 5 Backup
Code Description
Invalid characters were used in
the filename or folder name of
the backup destinations.
The backup destination files
were updated while the
backup job was running.
Code 23
The TeraStation backed
up the data to the FAT32-
formatted USB drive, then the
capitalization of letters in the
filenames or folder names on
the backup source TeraStation
was changed.
A file system on the backup
destination may be corrupted.
The backup destination files
Code 24 were updated while the
backup job was running.
The Ethernet cable was
disconnected from the
Code 30 backup source or destination
TeraStations while the backup
job was running.
Insufficient TeraStation
B14
memory.
B101
The backup destination
TeraStation does not exist.
B102
Corrective Action
Change the filename or folder
name using compatible characters.
Available characters are described in
the "Adding a Shared Folder"
in chapter 3.
Do not overwrite the backup
destination files while the backup job
is running. If updated, the backup
destination files will not be backed up
and the backup job will fail.
Do not change the capitalization
of letters in the filenames and
folder names on the backup source
TeraStation if the backup destination
USB drive is formatted to FAT32. Linux
on the TeraStation is case-sensitive
but FAT isn't, so files or folders with
names that are identical save for the
capitalization will not be identified
and treated as the same file or folder.
To back up properly, using Btrfs, XFS,
or ext3 is recommended.
Run a drive check on the backup
destination by referring to the
"Checking Drives" section in chapter
4.
Do not overwrite the backup
destination files while the backup job
is running. If updated, the backup
destination files will not be backed up
and the backup job will fail.
Reconnect the Ethernet cable.
Restart the TeraStation and try again.
Check that the backup destination
TeraStation is turned on, the Ethernet
cables are securely connected,
and the hostname of the backup
destination TeraStation has not been
changed.
Check that the backup destination
folders on the backup destination
TeraStation are on the shared folder
list and the backup destination
folders are configured for backup in
Settings.
129
Log Example
section
rsync error: some
files could not be
transferred (code 23) at
main.c(702)
rsync recv_generator:
failed to stat "filename":
Invalid argument (22)
rsync warning:
some files vanished
before they could be
transferred (code 24) at
main.c
rsync error: timeout
in data send/receive
(code 30) at io.c(195)
[sender=3.1.0]
-
-
-