Table of Contents
Advertisement
Chapter 13 Appendix
10GbE LAN Interface
Common Specs for LAN
Interface
USB Interface
Internal Drive
Standard Compliance
Data Transfer Rates
Number of Ports
Connector Type
Supported Protocols
Network File Services
MTU Sizes
Standards Compliance
Data Transfer Rates
Number of Ports
Connector Type
Number of Drive Bays
Drive Interface
Supported RAID
Replacement Drive
IEEE 802.3an (10GBASE-T), IEEE 802.3bz (2.5GBASE-T,
5GBASE-T), IEEE 802.3ab (1000BASE-T), IEEE 802.3u
(100BASE-TX)
2.5/5/10 Gbps, 100/1000 Mbps (auto sensing)
TS51220RH: 2
Other models than TS51220RH: 1
RJ-45 8-pin (auto MDI-X)
TCP/IP
SMB/CIFS, FTP/SFTP, NFS, HTTP/HTTPS, SNMP
1,500–9,216 bytes
USB 3.2 Gen 1/USB 2.0
USB 3.2 Gen 1: max. 5 Gbps
USB 2.0: max. 480 Mbps
TS5420DN: 2 × USB 3.2 Gen 1
TS5420RN, TS5820DN: 3 × USB 3.2 Gen 1
TS51220RH: 2 × USB 3.2 Gen 1, 2 × USB 2.0
Type A
TS5420DN, TS5420RN: 4
TS5820DN: 8
TS51220RH: 12
SATA 6 Gbps
0, 1, 5, 6, 10, JBOD (individual drives)
TS51220RH: Buffalo OP-HDH2U series drive
Other models than TS51220RH: Buffalo OP-HDN series drive
Note: The replacement drive should be the same capacity
or larger as the original drive. The drives listed above are
available from the
Buffalo
288
website.
Advertisement
Table of Contents
