Table of Contents
Advertisement
Chapter 11 Drive Replacement and Troubleshooting
5
Swing the lock back down until it clicks into place.
6
If the TeraStation's power is off, press the power button.
7
When the replaced drive is recognized, the error LED will blink and the
notification.
8
The replaced drive will be rebuilt into the RAID array automatically when auto RAID rebuild is enabled.
If not, you will have to rebuild the RAID array from Settings.
(1) From Settings, navigate to Storage > RAID.
(2) Click the RAID array that held the failed drive, then select the replaced drive and click Recover RAID Array.
9
The RAID array recovery will begin. The
10
The process is complete when the
Drive Replacement for a RAID 0 Array
If a drive used in a RAID 0 array fails, you need to delete the RAID array, format the replaced drive, then create a RAID
0 array again after replacing the defective drive to a new drive.
Note: If a drive malfunctions in a RAID 0 array, all data on the RAID array will be lost. All of the settings for the shared
folders (such as access restrictions) are erased after replacing a drive from a RAID 0 array.
1
Dismount the drive with the blinking error LED by referring to the
2
The error LED will stop blinking and glow steadily. Push its unlock button and swing the lock mechanism out.
3
Pull out the drive cartridge and remove it from the TeraStation.
4
Insert the new drive into the empty slot with the lock mechanism remaining open.
5
Swing the lock back down until it clicks into place.
6
When the replaced drive is recognized, the error LED and drive status LED will blink alternately and the
message will appear as a notification.
7
Delete the RAID array that held the failed drive by referring to the
8
Format the replaced drive by referring to the
9
Create a new RAID 0 array by referring to the
I18
message will appear as a notification after five minutes.
I18
message disappears.
"Formatting Drives"
"Creating a RAID Array"
262
I31
message will appear as a
"Using Settings"
section in chapter 4.
"Using JBOD"
section in chapter 4.
section in chapter 4.
section in chapter 4.
I31
Advertisement
Table of Contents
