Creating A Raid Array - Buffalo LinkStation 200 User Manual

Chapter 3 RAID Modes and Drive Management
1
From Advanced Settings, click Drives.
2
Click the settings icon (
3
Click Array1.
4
Click Delete RAID Array.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
6
Click OK when finished. Next, create a shared folder by referring to the
chapter 2.

Creating a RAID Array

Before creating a new RAID array, first put the drives into JBOD by referring to the
follow the procedure below.
1
From Advanced Settings, click Drives.
2
Click the settings icon (
) to the right of "RAID".
) to the right of "RAID".
53
"Adding a Shared Folder"
"Using JBOD" section above. Then,
section in