Rebuilding Or Resetting A Raid Array; Setting A Raid Building Password - Buffalo HD-QLU3R5 User Manual

Rebuilding or Resetting a RAID Array

To rebuild a RAID array or change your RAID mode, use the procedure described in "Building a RAID
Array".

Setting a RAID Building Password

You may protect the RAID array with a password. If a password is configured, it will be required to
change the RAID array.
Caution Be careful with this setting! If you set a password and then lose or forget it, you will not
be able to change your RAID settings.
Note: The example below shows Windows 7. Your screens may look slightly diff erent.
1
Start the RAID Utility.
For Windows, right-click the
For mac OS, double-click
22
HD-QLU3 User Manual
icon in the notifi cation area, and select [Open Utility].
(RaidUtility) which was copied to the Desktop.
Go to Next Page