Table of Contents
Advertisement
GS910/XST Series 10 Gigabit Ehternet Unmanaged Switch Installation and User's Guide
Unpacking the RKMT-J14 Rack Mount Kit
To unpack the RKMT-J14 rack mount kit, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that all hardware components are included in your rack mount
package listed in Table 15.
Table 15. Components in the RKMT-J14 Rack Mount Kit
Two Brackets
Two Handles
Four M3x6mm
screws for handles
Eight M4x6mm
screws
3. If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
Components
68
Advertisement
Table of Contents
