Table of Contents
Advertisement
GS910/XST Series 10 Gigabit Ehternet Unmanaged Switch Installation and User's Guide
DIP Switches
LED for the SFP/SFP+ Uplink Port
The LED next to the SFP/SFP+ slot displays link status for port 10 on the
GS910/10XST switch, port 18 on the GS910/18XST switch, or port 26 on
the GS910/26XST switch. See Figure 10.
Link / Activity
Figure 10. LED on SFP/SFP+ Port
Table 7 describes the LED for the SFP/SFP+ port.
LED
State
Link/Activity
Green
Blinking
Green
Off
The switch has two DIP switches on the front panel. You can turn on or off
Loop Prevention and Energy Efficient Ethernet (EEE). See Figure 11.
When the DIP switch in the up position, a function is enabled; the DIP
switch is in the down position, the function is disabled.
x
Table 7. SFP/SFP+ Port LEDs
The port has established a link to a network
device at 1Gbps or 10Gbps speed.
The port is transmitting or receiving frames
at 1Gbps or 10Gbps speed.
No link is established.
Figure 11. DIP Switches
Description
22
Advertisement
Table of Contents
