Table of Contents
Advertisement
GS910/XST Series 10 Gigabit Ehternet Unmanaged Switch Installation and User's Guide
4. Turn the tray fixing screws on counter clockwise and pull out the tray.
See Figure 40.
You can draw the tray to a maximum of 250mm from the tray chassis.
x
Figure 40. Pulling out the RKMT-J15 Tray
5. Place a switch in the tray and secure the switch to the tray with the
head screws through the holes on the slide rail weld. See Figure 41 on
page 75.
Note
Install one switch at a time.
74
Advertisement
Table of Contents
