Sfp/Sfp+ Slot - Allied Telesis GS910/XST Series Installation And User Manual

SFP/SFP+ Slot

Speed
Port 9 on the GS910/10XST switch, port 17 on the GS910/18XST switch,
and port 25 on the GS910/26XST switch are capable of 100Mbps, 1Gbps,
2.5Gbps, 5Gbps, and 10Gbps speeds. The ports are IEEE802.3u
Auto-Negotiation compliant. With Auto-Negotiation, the switches
automatically match the highest possible common speed between the
switch port and its end-node.
Duplex Mode
These twisted pair ports operate in the full-duplex mode.
Auto MDI/MDI-X
These twisted pair ports feature auto-MDI to automatically configure
themselves as MDI or MDI-X when connected to an end-node.
Consequently, you can use a straight-through twisted pair cable to
connect any network device to a port.
The switch supports 1G and 10G speed on one SFP/SFP+ slot. Port 10 on
the GS910/10XST switch, port 18 on the GS910/18XST switch, and port
26 on the GS910/26XST switch are SFP/SFP+ ports.
Table 3 on page 17 shows a list of supported SFP transceivers:
Table 3. Supported SFP Transceivers
Supported Model
AT-SP10SR/I
AT-SP10LR/I
AT-SP10LR20/I
AT-SP10ER40/I
AT-SP10ZR80/I
AT-SPSX
AT-SPSX/I
AT-SPEX
AT-SPLX10
AT-SPLX10/I
AT-SPLX10a
AT-SPLX40
Chapter 1: Product Description
Maximum Operating Temperature
85° C (185° F)
85° C (185° F)
85° C (185° F)
85° C (185° F)
85° C (185° F)
70° C (158° F)
85° C (185° F)
70° C (158° F)
70° C (158° F)
85° C (185° F)
70° C (158° F)
70° C (158° F)
17