Allied Telesis GS910/XST Series Installation And User Manual page 33

10 gigabit ethernet unmanaged switches
Table of Contents

Advertisement

Chapter 2: Installation
Warning
Operating Temperature. This product is designed for a maximum
ambient temperature of 50 degrees C.
E57
Note
All Countries: Install product in accordance with local and National
Electrical Codes.
E8
Warning
An insecurely attached device on a wall may fall and the falling
device may lead to damaging itself or causing injuries.
E96
Warning
Do not install the device on an unstable wall or a wall affected by
vibration or impact. The device may fall and falling device may lead
to damaging itself or causing injuries.
E97
Warning
Do not install the device high on a wall. The device may fall and the
falling device may lead to damaging itself or causing injuries.
E98
Warning
Disconnecting the Device: If the device becomes damaged or you
encounter abnormality with the device, disconnect the power plug
from the AC wall outlet immediately.
E100
Warning
Use appropriate screws to attach the device and brackets to a
19-inch rack. If a device is installed insecurely in a rack, it may fall,
potentially causing injuries or damage to the device.
E104
Caution
Transceivers can be damaged by static electricity. Be sure to
observe all standard electrostatic discharge (ESD) precautions,
such as wearing an antistatic wrist strap, to avoid damaging the
devices.
E92
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs910/10xstGs910/18xstGs910/26xst

Table of Contents