Allied Telesis GS910/XST Series Installation And User Manual page 13

IEEE802.3u compliant for 100Base-TX

IEEE802.3ab compliant for 1000Base-T

IEEE802.3bz compliant for 2.5GBase-T and 5GBase-T

IEEE802.3an compliant for 10Gbps Ethernet

Auto-Negotiation (IEEE 802.3u-compliant) on all ports

Store-and-forward switching method

Jumbo frames of 12K bytes without frame loss

Up to 16,384 MAC address entries

Link down power saving on 10/100/1000Mbps twisted pair ports

Auto MDI/MDI-X on all twisted pair ports

Head-of-Line (HOL) Blocking Prevention

IEEE 802.3x flow control for full-duplex operation

Back pressure flow control for half-duplex operation

EAP/BPDU pass through

Loop Prevention, which can be enabled or disabled from the DIP

switch
IEEE 802.3az Energy Efficient Ethernet on 10/100/1000Mbps

copper ports when operating at 100/1000Mbps speed, which can
be enabled or disabled from the DIP switch
RoHS compliant

Wall mounting and equipment rack mounting with optional

brackets. See Table 1.
Table 1. Wall-mount and Rack-Mount Brackets
Model
GS910/10XST
GS910/18XST
GS910/26XST
Chapter 1: Product Description
Wall Mounting
BRKT-J24
BRKT-J22
Rack Mounting
RKMT-J14
RKMT-J15
RKMT-J09
13