Epson S1C17W22 Technical Manual page 173

14 I 2 C (I2C)
Bit 7 BYTEENDIE
Bit 6 GCIE
Bit 5 NACKIE
Bit 4 STOPIE
Bit 3 STARTIE
Bit 2 ERRIE
Bit 1 RBFIE
Bit 0 TBEIE
These bits enable I2C interrupts.
1 (R/W): Enable interrupts
0 (R/W): Disable interrupts
The following shows the correspondence between the bit and interrupt:
I2CnINTE.BYTEENDIE bit: End of transfer interrupt
I2CnINTE.GCIE bit:
I2CnINTE.NACKIE bit:
I2CnINTE.STOPIE bit:
I2CnINTE.STARTIE bit:
I2CnINTE.ERRIE bit:
I2CnINTE.RBFIE bit:
I2CnINTE.TBEIE bit:
14-22
General call address reception interrupt
NACK reception interrupt
STOP condition interrupt
START condition interrupt
Error detection interrupt
Receive buffer full interrupt
Transmit buffer empty interrupt
Seiko Epson Corporation
S1C17W22/W23 TECHNICAL MANUAL
(Rev. 1.3)