Configuring system
settings
Learn how to configure the system settings.
Changing the language
Choose the language you want displayed on projector display panel and on-screen display.
1. Select Menu > Configuration > Language.
You can also select Menu > Language.
2. Select the appropriate language.
3. Press ENTER.
Enabling Low Latency Mode
Enable the Low Latency Mode to minimize the input lag. This function is used for live broadcasting,
streaming media, and similar installations.
1. Select Menu > Configuration > Low Latency Mode.
2. Select the appropriate mode.
•
Off—Disable the function.
•
Typical—Reduce the input lag for the input signal that is not 3840x2160 @60 Hz.
•
Ultra 4K—Minimize the latency for the non 4K signals.
Selecting Ultra 4K disables the functions requiring the use of the scalar, such as Motion
Estimate and Motion Compensation (MEMC) and Picture in Picture/Picture by Picture
(PIP/PBP).
3. To enbale the setting, press ENTER.
4K7-HS/4K10-HS User Manual
020-001451-04 Rev. 1 (11-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
45