Add/Edit Mac Addresses - ZyXEL Communications WX Series User Manual

Setting > Wireless > MAC Authentication. The screen appears as shown.
Figure 45 Network Setting> Wireless > MAC Authentication
The following table describes the labels in this screen.
Table 25 Network Setting > Wireless > MAC Authentication
LABEL
General
SSID
MAC Restrict
Mode
MAC Address List
Add New MAC
Address
#
MAC Address
Modify
Cancel
Apply

7.4.1 Add/Edit MAC Addresses

Click Add new MAC address in the Network Setting > Wireless > MAC Authentication screen to add a
new MAC address. You can also click the Edit icon next to a MAC authentication rule to edit the rule.
Chapter 7 Wireless
DESCRIPTION
Select the SSID for which you want to configure MAC filter settings.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Disable to turn off MAC filtering.
Select Deny to block access to the WX Device. MAC addresses not listed will be allowed to
access the WX Device.
Select Allow to permit access to the WX Device. MAC addresses not listed will be denied access
to the WX Device.
This field is available when you select Deny or Allow in the MAC Restrict Mode field.
Click this if you want to add a new MAC address entry to the MAC filter list below.
This is the index number of the entry.
This is the MAC addresses of the WiFi devices that are allowed or denied access to the WX
Device.
Click the Edit icon and type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the Delete icon to delete the entry.
Click Cancel to restore the default or previously saved settings.
Click Apply to save your changes.
WX Series User's Guide
106