Chapter 17 Backup/Restore
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the WX Device to its
factory defaults. The following warning screen appears.
Figure 84 Reset Warning Message
Figure 85 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your WX Device.
Refer to
Section 2.5 on page 29
for more information on the RESET button.
17.3 Reboot
System Reboot allows you to reboot the WX Device remotely without turning the power off. You may
need to do this if the WX Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the WX Device reboot. This does not affect the WX
Device's configuration.
WX Series User's Guide
159