Table of Contents
Advertisement
Note: After you have configured your WX3310, you must remember to change your static IP
back to automatic to be able to access the Internet. If you want to change the IP
address to automatic (default) then repeat steps 1 to 4, for step 5 select the Obtain an
IP address automatically radio button, and click OK.
2.3.2 Static IP Configuration in MAC OS X
Follow these steps to change your computer's IP address in MAC OS X 10.11 operating system.
Open your System Preferences, then click on Network.
1
Once the Network screen is open, it is recommended you click on Location > Edit Locations to create a
2
new profile. Use the + button to add a new profile, in this case it is called Static IP. This will easily help you
change from static IP address to automatic.
Chapter 2 The Web Configurator
WX3310-B0 User's Guide
21
Advertisement
Table of Contents
