Ap List Screen - ZyXEL Communications WX Series User Manual

Table 29 Network Setting > Wireless > Operating Modes (continued)
LABEL
WPS Setup
WPS
Click WPS button
Apply
Cancel

7.10 AP List Screen

You can use this screen to select an AP and enter its WiFi password to connect to the WiFi network.
Click Network Setting > Wireless > AP List. The screen appears as shown.
Note: The AP List is available when you select 5 GHz WiFi connection. (See
page
Figure 53 Network Setting > Wireless > AP List
Chapter 7 Wireless
DESCRIPTION
Select this to activate or deactivate the WPS method.
Click this to connect the WX Device to the AP using the WPS method.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
98).
WX Series User's Guide
116
Section 7.2 on