ZyXEL Communications WX Series User Manual page 156

Table 47 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Current This is the present Firmware version and the date created.
Firmware
Version
File Path Enter the location of the file you want to upload in this field or click Browse/Choose File to find it.
Browse/ Click this to find the .bin file you want to upload. Remember that you must decompress
Choose File
compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two minutes.
Figure 79 Firmware Uploading
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click OK to go back to the Firmware
Upgrade screen.
Figure 80 Error Message
Note that the WX Device automatically restarts during the upload, causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Network Temporarily Disconnected
Chapter 16 Firmware Upgrade
WX Series User's Guide
156