Guest/More Ap; Edit Guest/More Ap Settings - ZyXEL Communications WX Series User Manual

7.3 Guest/More AP

This screen allows you to configure a guest WiFi network that allows access to the Internet only through
the WX Device. You can also configure additional WiFi networks, each with different security settings, in
this screen.
The following table introduces the supported WiFi networks.
Table 22 Supported WiFi Networks
WIFI NETWORKS
Main/1
Guest/3
Click Network Setting > Wireless > Guest/More AP. The following screen displays.
Figure 43 Network Setting > Wireless > Guest/More AP
The following table describes the labels in this screen.
Table 23 Network Setting > Wireless > Guest/More AP
LABEL
#
Status
SSID
Security
Guest WLAN
Modify

7.3.1 Edit Guest/More AP Settings

Use this screen to create Guest and additional WiFi networks with different security settings.
Click the Edit icon next to an SSID in the Guest/More AP screen. The following screen displays.
Chapter 7 Wireless
WHERE TO CONFIGURE
Network Setting > Wireless > General screen
Network Setting > Wireless > Guest/More AP screen
DESCRIPTION
This is the index number of the entry.
This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active, while a
gray bulb signifies that this SSID is not active.
An SSID profile is the set of parameters relating to one of the WX Device's BSSs. The SSID (Service Set
IDentifier) identifies the Service Set with which a WiFi device is associated.
This field displays the name of the WiFi profile on the network. When a WiFi client scans for an AP to
associate with, this is the name that is broadcast and seen in the WiFi client utility.
This field indicates the security mode of the SSID profile.
This displays if the guest WiFi function has been enabled for this WiFi network.
If Home Guest displays, clients can connect to each other directly.
If External Guest displays, clients are blocked from connecting to each other directly.
N/A displays if the guest WiFi network is disabled.
Click the Edit icon to configure the SSID profile.
WX Series User's Guide
103