ZyXEL Communications WX Series User Manual page 111

Figure 49 Network Setting > Wireless > Others
The following table describes the labels in this screen.
Table 28 Network Setting > Wireless > Others
LABEL DESCRIPTION
Output Power Set the output power of the WX Device. If there is a high density of APs in an area, decrease the
output power to reduce interference with other APs. Select one of the following: 20%, 40%,
60%, 80% or 100%.
Beacon Interval When a WiFi network device sends a beacon, it includes with it a beacon interval. This specifies
the time period before the device sends the beacon again.
The interval tells receiving devices on the network how long they can wait in low power mode
before waking up to handle the beacon. This value can be set from 50 ms to 1000 ms. A high
value helps save current consumption of the access point.
DTIM Interval Delivery Traffic Indication Message (DTIM) is the time period after which broadcast and
multicast packets are transmitted to mobile clients in the Power Saving mode. A high DTIM
value can cause clients to lose connectivity with the network. This value can be set from 1 to
255.
Chapter 7 Wireless
WX Series User's Guide
111