ZyXEL Communications WX Series User Manual page 104

Figure 44 Network Setting > Wireless > Guest/More AP > Edit
The following table describes the fields in this screen.
Table 24 Network Setting > Wireless > Guest/More AP > Edit
LABEL DESCRIPTION
Wireless Network Setup
Wireless Slide the switch to the right (
Wireless Network Settings
Wireless The SSID (Service Set IDentity) identifies the service set with which a WiFi device is associated.
Network Name WiFi devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for WiFi.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through scanning using a site survey tool.
Guest WLAN Select this to create Guest WiFis for home and external clients.
Access Scenario If you select Home Guest, clients can connect to each other directly.
If you select External Guest, clients are blocked from connecting to each other directly.
BSSID This shows the MAC address of the WiFi interface on the WX Device when WiFi is enabled.
Chapter 7 Wireless
) to enable WiFi.
WX Series User's Guide
104