Firmware Upgrade; Chapter 16 Firmware Upgrade; Firmware Upgrade Overview; Firmware Upgrade Settings - ZyXEL Communications WX Series User Manual

16.1 Firmware Upgrade Overview

This screen lets you upload new firmware to your WX Device. You can download new firmware releases
from your nearest Zyxel FTP site (or www.zyxel.com) to upgrade your device's performance.
Only use firmware for your device's specific model. Refer to the label on
the bottom of your WX Device.

16.2 Firmware Upgrade Settings

Click Maintenance > Firmware Upgrade to open the following screen. Download the latest firmware file
from the Zyxel website and upload it to your WX Device using this screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to 2 minutes. After a successful upload, the WX Device
will reboot.
Do NOT turn off the WX Device while firmware upload is in progress!
Figure 78 Maintenance > Firmware Upgrade
The following table describes the labels in this screen. After you see the firmware updating screen, wait
two minutes before logging into the WX Device again.
Table 47 Maintenance > Firmware Upgrade
LABEL
Upgrade Firmware
Restore Default
Settings After
Firmware
Upgrade

Firmware Upgrade

DESCRIPTION
Select the check box to have the WX Device automatically reset itself after the new firmware is
uploaded.
WX Series User's Guide
C
H A P T E R
155
16