ZyXEL Communications WX Series User Manual page 35

Table 9 Configuration Menus Summary (continued)
LINK
Home
Networking
Security
Certificates
System Monitor
Log
WLAN Station
Status
Maintenance
System
User Account
Remote
Management
Time
Log Setting
Firmware
Upgrade
Backup/Restore
Reboot
Diagnostic
3.3.1.2 Icons
The navigation panel provides some icons on the right hand side.
Chapter 3 Web Configurator
TAB FUNCTION
Channel Status Use this screen to scan WiFi channel noises and view the results.
Home Use this screen to configure DHCP/Static IP settings, and other advanced
Networking properties.
Local Certificates Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Trusted CA Use this screen to view and manage the list of the trusted CAs.
Log Use this screen to view the status of events that occurred to the WX
Device. You can export or email the logs.
WLAN Station Use this screen to view the WiFi stations that are currently associated with
Status the WX Device.
System
Use this screen to set Device name.
User Account Use this screen to change user password on the WX Device.
Remote Use this screen to enable specific traffic directions for network services.
Management
Time Use this screen to change your WX Device's time and date.
Log Setting Use this screen to change your WX Device's log settings.
Firmware Use this screen to upload firmware to your WX Device.
Upgrade
Backup/Restore Use this screen to backup and restore your WX Device's configuration
(settings) or reset the factory default settings.
Reboot Use this screen to reboot the WX Device without turning the power off.
Ping&Traceroute Use this screen to identify problems with the WX Device. You can use
Ping or TraceRoute to help you identify problems.
WX Series User's Guide
35