ZyXEL Communications WX Series User Manual page 23

Table 4 LED Table (for WX Device-1) (continued)
LED COLOR
Link (With a Green
WiFi
Red
connection)
Link (With a Green
wired
connection)
WiFi Green
WPS Amber
Table 5 LED Table (for WX Device-2)
LED COLOR
POWER Green
Red
Link (with a Green
WiFi
Red
connection)
Link (with a Green
wired
connection)
WiFi Green
WPS Amber
Chapter 2 Hardware
STATUS DESCRIPTION
On The WiFi connection to the MPro Mesh router is good.
On The signal is too weak. Move the WX Device closer to the MPro
Mesh Router.
On The Ethernet cable is connected to the LAN port on the WX
Device.
On The 2.4G / 5G WiFi is ready.
Blinking The WX Device is transmitting/receiving WiFi data.
Off The 2.4G / 5G WiFi is disabled.
On This indicates the WX Device is the controller.
Blinking If you press the WPS button, amber blinking within 120 seconds
means the WPS is in process.
Off The WPS process is done.
STATUS DESCRIPTION
On Power is on or MPro Mesh pairing is done.
Blinking The WX Device-2 is starting up or the MPro Mesh pairing is in
process.
On The WX Device-2 detects a system error.
Blinking The WX Device-2 is upgrading firmware or the MPro Mesh pairing
has failed.
On The WiFi connection to the WX Device-1 is good.
On The signal is too weak. Move the WX Device-2 closer to the WX
Device-1.
On The Ethernet cable is connected to the LAN port on the WX
Device-2.
On The 2.4 G / 5 G WiFi is ready.
Blinking The WX Device-2 is transmitting/receiving WiFi data.
Off The 2.4 G / 5 G WiFi is disabled.
Blinking If you press the WPS button, amber blinking within 120 seconds
means the WPS is in process.
Off The WPS process is done.
WX Series User's Guide
23