User Account Add/Edit - ZyXEL Communications WX Series User Manual

Table 43 Maintenance > User Account (continued)
LABEL
Idle Timeout
Lock Period
Group
Modify
Cancel
Apply

13.2.1 User Account Add/Edit

Click Add New Account or the Edit icon of an existing account in the Maintenance > User Account to
open the following screen.
Figure 75 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Table 44 Maintenance > User Account > Add/Edit
LABEL
Active
User Name
Password
Verify Password
Chapter 13 User Account
DESCRIPTION
This field displays the length of inactive time before the WX Device will automatically log the user
out of the Web Configurator.
This field displays the length of time a user must wait before attempting to log in again after a
number if consecutive wrong passwords have been entered as defined in Retry Times.
This field displays whether this user has Administrator or User privileges.
Click the Edit icon to configure the entry.
Click the Delete icon to remove the entry.
Click Cancel to restore the default or previously saved settings.
Click Apply to save your changes.
DESCRIPTION
Select Enable or Disable to activate or deactivate the user account.
Enter a new name for the account. The User Name must contain 1 to 15 characters, including 0
to 9, a to z, and !@#%*()-_+=~,.{}[]\. Spaces are not allowed.
Type your new system password. The Password must contain 6 to 64 characters, including 0 to 9
and a to z. Note that as you type a password, the screen displays a (*) for each character you
type. After you change the password, use the new password to access the WX Device.
Type the new password again for confirmation.
WX Series User's Guide
148