Static Ip Configuration In Mac Os X - ZyXEL Communications WAP6807 User Manual

Hide thumbs Also See for WAP6807:

Table of Contents

In the Internet Protocol Version 4 (TCP/IPv4) properties, click Use the following IP address radio button

and enter the new IP address. Your computer must be in the same subnet in order to access this website

address. You must give it a fixed IP address in the range between 192.168.1.3 and 192.168.1.254 (except

192.168.1.5). Then type 255.255.255.0 as your subnet mask, click OK to close the Internet Protocol Version

4 (TCP/IPv4) Properties window. Then click OK to close the Local Area Connection Properties window.

Note: After you have configured your WAP6807, you must remember to change your static IP

back to automatic to be able to access the Internet. If you want to change the IP

address to automatic (default) then repeat steps 1 to 4, for step 5 select the Obtain an

IP address automatically radio button, and click OK.

5.4.2 Static IP Configuration in MAC OS X

Follow these steps to change your computer's IP address in MAC OS X 10.11 operating system.

Chapter 5 Web Configurator

WAP6807 User's Guide

Table of Contents

Show Quick Links

Table of Contents