ZyXEL Communications WX Series User Manual page 115

Figure 52 Network Setting > Wireless > Operating Modes (6 GHz WiFi Band)
The following table describes the labels in this screen.
Table 29 Network Setting > Wireless > Operating Modes
LABEL
Operating Modes
Modes
Wireless Setup
Wireless Network Name
Connection Status
Security Mode
Password
Chapter 7 Wireless
DESCRIPTION
This displays the operating mode of the WX Device.
• If the WX Device is connected to the AP using a cable, the WX Device will be in
the AP mode.
• If the WX Device is connected to the AP wirelessly, the WX Device will be in the
repeater mode.
Enter the name of the WiFi network (SSID) to which the WX Device is connecting.
Please note that the AP you want the WX Device to connect to must:
• Support 5 GHz WiFi or 6 GHz WiFi.
• Have 5 GHz or 6 GHz WiFi enabled.
See Table 1 on page 12 for more information on the WiFi band your WX Device
supports for Operating Modes.
This field displays if the WX Device is connected to the WiFi network of the AP you
specified.
Select the security mode the AP uses from the drop down list box.
Enter the password of the WiFi network to which the WX Device is connecting.
WX Series User's Guide
115