Wmm Settings - ZyXEL Communications WX Series User Manual

Table 26 Network Setting > Wireless > WPS (continued)
LABEL
Register
Method 3
Release
Configuration
Generate
New PIN
Cancel
Apply

7.6 WMM Settings

Use this screen to enable WiFi MultiMedia (WMM) and WMM Automatic Power Save Delivery (APSD) in
WiFi networks for multimedia applications. WMM enhances data transmission quality, while APSD
improves power management of WiFi clients. This allows delay-sensitive applications, such as voice and
videos, to run more smoothly.
Click Network Setting > Wireless > WMM to display the following screen.
Chapter 7 Wireless
DESCRIPTION
Enter the PIN of the device that you are setting up a WPS connection with and click Register to
authenticate and add the WiFi device to your WiFi network.
You can find the PIN either on the outside of the device, or by checking the device's settings.
Note: You must also activate WPS on that device within 2 minutes to have it present
its PIN to the WX Device.
Use this section to set up a WPS WiFi network by entering the PIN of the WX Device into the
client. Click this switch and make it turn blue. Click Apply to activate WPS method 3 on the WX
Device.
Note: Not all WX Devices support WPS method 3; see
information.
The default WPS status is configured.
Click this button to remove all configured WiFi and WiFi security settings for WPS connections on
the WX Device.
If this method has been enabled, the PIN (Personal Identification Number) of the WX Device is
shown here. Enter this PIN in the configuration utility of the device you want to connect to using
WPS.
The PIN is not necessary when you use the WPS push-button method.
Click the Generate New PIN button to have the WX Device create a new PIN.
Click Cancel to restore the default or previously saved settings.
Click Apply to save your changes.
WX Series User's Guide
109
Table 1 on page 12 for more