14.1 Remote Management Overview
Use remote management to control what services you can use through which interface(s) in order to
manage the WX Device.
14.1.1 What You Can Do in this Chapter
Use the Remote Management screen to allow various approaches to access the WX Device remotely
from a LAN connection
Note: The WX Device is managed using the Web Configurator.
14.2 Management Services
Use this screen to configure through which interface(s), each service can access the WX Device. You
can also specify service port numbers computers must use to connect to the WX Device. Click
Maintenance > Remote Management > Remote Management to open the following screen.
Figure 76 Maintenance > Remote Management > Remote Management
Remote Management
(Section 14.2 on page
WX Series User's Guide
C
H A P T E R
150).
150
14