Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 16 Network > Wireless LAN 2.4G or 5G > Security: WPA-PSK/WPA2-PSK
L ABEL
Security Mode
WPA-PSK
Compatible
Pre-Shared Key
Group Key Update
Timer
Apply
Cancel
7.6 MAC Filte r
The MAC filter screen allows you to configure the PLA to give exclusive access to devices (Allow) or
exclude devices from accessing the PLA (Deny). Every Ethernet device has a unique MAC (Media
Access Control) address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the
devices to configure this screen.
To change your PLA's MAC filter settings, click
screen appears as shown.
Chapter 7 Wireless LAN
DESC RIPT IO N
Select
or
WPA- PSK
WPA2- PSK
This field appears when you choose
Check this field to allow wireless devices using
PLA.
uses a simple common password for authentication.
WPA- PSK/ WPA2- PSK
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
The
G ro up Ke y Upda te T im e r
clients.
The default is
seconds (60 minutes).
3600
Click
to save your changes back to the PLA.
Apply
Click
to reload the previous configuration for this screen.
C a nc e l
PLA5236 User's Guide
41
to enable data encryption.
as the
WPA2- PSK
Se c urity Mo de
WPA- PSK
is the rate at which the AP sends a new group key out to all
>
Ne two rk
Wire le ss L AN 2.4G o r 5G
.
security mode to connect to your
>
. The
MAC Filte r
Advertisement
Table of Contents
