Hardware; Chapter 2 Hardware; Leds - ZyXEL Communications WX Series User Manual

2.1 LEDs

Use the LEDs to determine if the WX Device is behaving normally or if there are problems on your
network.
See Table 4 on page 22
Figure 14 WX5600-T0 / WX3100-T0's Front Panel
The following table describes the LED behaviors of WX3401, WX3100 and WX5600. None of the LEDs are
on if the WX Device is not receiving power.
Table 4 LED Table (for WX Device-1)
LED
POWER
and Table 5 on page 23
COLOR STATUS
Green On
Blinking
Red On
Blinking
WX Series User's Guide
C
H A P T E R

Hardware

for more information on the LEDs.
DESCRIPTION
Power is on or MPro Mesh pairing is done.
The WX Device is starting up or the MPro Mesh pairing is in
process.
The WX Device detects a system error.
The WX Device is upgrading firmware or the MPro Mesh pairing
has failed.
22
2