Hardware Extensions - Auerswald COMpact 5000 Setup Manual

Important: Operating the PBX without modules is not possible.
Operating the PBX without system release is not possible.
Using the voice mail channel will result in the loss of one VoIP channel.
It is not possible to use the voice mailbox without inserted USB memory
stick.
The fax function is not included in the basic assembly.
The basic assembly offers the following unlockable functions/resources for the
PBXs:

Hardware Extensions

The PBXs have 5 variable module slots for the following modules:
The PBXs have one module slot for the following module:
Important: Due to technical reasons, when inserting the COMpact 4DSP
module, the 4 VoIP channels and the voice mail channel of the CPU module
are switched off.
It is not possible to use the voice mail and faxboxes without inserted USB
memory stick.
COMpact 5000/R - Firmware Version 6.2 - Setup V01 03/2014
4 VoIP channels for internal IP and Internet telephony (SIP-compliant
according to RFC 3261; support for VoIP Codec G.711 µ-Law/a-Law)
1 voice mail channel for voice mail functions with one voice mailbox
10 configurations
18000 call data records
Project-related calls (project numbers)
Call Through calls (Call Through for all lines)
LAN-TAPI for 4 subscribers
Soft-LCR for all subscribers
COMpact 2FXO module – extends the PBX by 2 additional external ana-
logue ports.
COMpact 4FXS module – extends the PBX by 4 internal analogue ports.
COMpact 2BRI module – extends the PBX by 2 ports which can be sep-
aratly configured for S
of a jumper.
COMpact 4DSP module – extends the PBX to 8 VoIP, voice mail and fax
channels for IP and Internet telephony (SIP-compliant according to RFC
3261; support for SIPS, SRTP, T.38 and VoIP Codecs G.711 µ-Law/a-
Law, G.723.1, G.726, G.729A/E and iLBC) as well as voice mail and fax
function with 20 voice mailboxes snd 20 fax boxes.
Important Information
external, S internal and U
0 0
internal by means
P0
55