Hioki MEMORY HiCORDER MR8847-01 Instruction Manual page 31

If not installing another input module after removal
Right Side
About channel
allocation
LA LB LC LD
[1:4] [1:4] [1:4] [1:4]
Ch1
Ch3
Ch15
Analog channels only
Using the Phillips screwdriver, tighten the two mount-
ing screws.
Blank panel
Measurements made without a blank panel
installed may fail to meet specifications because
of temperature instability within the instrument.
When the instrument is positioned vertically as illustrated, module number one is
at the top, and channel number one is at the left of the top.
Information about the input modules installed in the instrument can be verified in the Sys-
tem Configuration list [System
Ch2
Ch4
Ch16
2.1 Install an input module
Information].
LA LB LC LD
[1:4] [1:4] [1:4] [1:4]
L7A L7B L7C L7D
[1:4] [1:4] [1:4] [1:4]
Mix including logic modules
21
2
Module 1
Module 2
Module 3
Module 4
Module 5
Module 6
Module 7
Module 8