Table of Contents
Advertisement
2.9
Audio interface
The MPS2 and MPS2+ FPGA Prototyping Boards provide a stereo line-level input and a stereo line-level
output.
The audio interface consists of an audio controller in the FPGA, a low-power audio codec, and input and
output stereo audio ports. The audio controller configures the codec over an I
codec send audio data to each other over an I
The following diagram shows the audio interface.
Related information
5.8 Audio connectors on page 5-87
1.3 Location of components on the MPS2 FPGA Prototyping Board on page 1-17
1.4 Location of components on the MPS2+ FPGA Prototyping Board on page 1-19
100112_0200_09_en
MPS2/MPS2+ FPGA Prototyping Board
Copyright © 2013–2016, 2018–2020 Arm Limited or its affiliates. All
rights reserved.
Non-Confidential
2
S bus.
2
I
S
audio
Stereo audio
FPGA
I
2
C
2 Hardware Description
2.9 Audio interface
2
C bus. The FPGA and
Audio
Line-level input
and output
codec
stereo audio
Audio
Figure 2-9 Audio interface
2-33
Advertisement
Table of Contents
