Selecting The Default Storage Media - Agilent Technologies X Series User Manual
Signal generators
Hide thumbs
Also See for X Series:
- Manual (622 pages) ,
- User manual (175 pages) ,
- Programmer's manual (115 pages)
Table of Contents
Advertisement
Basic Operation
Working with Files
Selecting the Default Storage Media
You can configure the signal generator to store user files to either the internal storage or to external
USB media. To automatically switch between USB media and internal storage, depending on whether
USB media is attached, select Automatically Use USB Media If Present. To avoid storing any confidential
information in the instrument, select Use Only USB Media. To avoid storing any confidential information
to USB media, select Use Only Internal Storage.
This selection is unaffected by power−cycle or preset.
File > More >
Current
selection
72
This is the recommended selection. When USB media is attached to the
front panel, it is the selected media; when USB media is not attached,
internal storage is used.
Memory in the instrument is used, and USB media is ignored.
Media attached to the front panel USB connector is used, and no user
data is stored to internal storage.
Select the directory on the USB media to be used for all file operations
when USB media is attached and enabled.
For details on each key, use key help as described on
Agilent X-Series Signal Generators User's Guide
page
44.
Advertisement
Table of Contents
