Connecting The Clock Source And The Device Under Test - Agilent Technologies X Series User Manual

Figure 10-7 Clock Phase and Skew Adjustments
90 degree phase adjustment
Phase and
skew adjusted
clock
Phase adjusted
clock
Clock
Data

Connecting the Clock Source and the Device Under Test

As shown in Figure 10- 3 on page
reference to the system components (signal generator, N5102A module, and the device under test).
Figure 10- 8 shows an example setup where the signal generator supplies the common frequency
reference and the N5102A module is providing the clock to the device.
CAUTION
The Device Interface connector on the interface module communicates using high speed
digital data. Use ESD precautions to eliminate potential damage when making
connections.
Agilent X-Series Signal Generators User's Guide
Clock skew adjustment
258, there are numerous ways to provide a common frequency
Digital Signal Interface Module (Option 003/004)
Connecting the Clock Source and the Device Under Test
265