Loading (Recalling) A Stored File - Agilent Technologies X Series User Manual

Basic Operation
Working with Files

Loading (Recalling) a Stored File

There are several ways to load (recall) a stored file.
• For an instrument state file, use the Recall hardkey shown in
• For other types of data, use the Load/Store softkey (shown below) that is available through the
menu used to create the file.
Loading a File From USB Media
To load a file from USB media, use the USB file manager shown below.
File > Catalog Type > <type> > More > USB File Manager
or
File > More > USB File Manager
or
Insert the USB media
This key changes, depending
on the selected file.
Copy & Select User Flatness
Copy & Play Waveform
Copy & Play Sequence
Enter Directory
Recall Instrument State
Load List
Load Pulse Train
Install licenses
No action
Use As
If the signal generator does not recognize the file,
you must select how the file is to be used.
For details on each key, use key help as described on
66
(USB disconnected)
page 44.
Figure 3- 8 on page
File Type Extension Pressing Select with file highlighted...
List .list loads list and starts sweep
.state load instrument state
State
Waveform .waveform loads and plays waveform
User Flatness .uflat loads and applies user flatness
.uprst loads and executes user preset
User Preset
License .lic installs purchased license
Pulse Train .ptrain loads and applies pulse train
Agilent X-Series Signal Generators User's Guide
68.
File Type Recall From
List Sweep menu
Save menu
State
Waveform Mode menu
Amplitude menu
User Flatness
User Preset menu
User Preset
Pulse Train Pulse Train menu