Playing A Sequence - Agilent Technologies X Series User Manual

Basic Digital Operation (Option 653/655/656/657)
Waveform Sequences
2. Change the first segment so that it repeats 100 times:
Highlight the first segment entry and press Edit Repetitions > 100 > Enter.
The cursor moves to the next entry.
3. Change the repetition for the selected entry to 200:
Press Edit Repetitions > 200 > Enter.
4. Save the changes made in the previous steps:
Press More > Name and Store > Enter.
To save the changes as a new sequence:
a. Press More > Name and Store > Clear Text.
b. Enter a file name (for example, SINE100+RAMP200).
c. Press Enter.
The edited sequence saves as a new waveform sequence.

Playing a Sequence

If you have not created a waveform sequence, refer to
NOTE
To play a waveform segment individually or as part of a waveform sequence, the segment
must reside in BBG media. See also,
page 148.
1. Select a waveform sequence:
a. Press Mode > Dual ARB > Select Waveform.
b. Highlight a waveform sequence (for this example, SINE100+RAMP200) from the Sequence On
column.
c. Press Select Waveform.
The display shows the currently selected waveform (for example, Selected Waveform:
SEQ:SINE100+RAMP200).
154
"Creating a Sequence" on page
"Loading a Waveform Segment into BBG Media" on
Annunciators display with active waveform (ARB On)
Current waveform selection
152.
Agilent X-Series Signal Generators User's Guide