Remote Operation Preferences; Gpib Address And Remote Language - Agilent Technologies X Series User Manual
Signal generators
Hide thumbs
Also See for X Series:
- Manual (622 pages) ,
- User manual (175 pages) ,
- Programmer's manual (115 pages)
Table of Contents
Advertisement
Setting Preferences & Enabling Options
Remote Operation Preferences
Remote Operation Preferences
For details on operating the signal generator remotely, refer to the Programming Guide.
GPIB Address and Remote Language
32
NOTES
USB is also available. It is not shown in the menu because it requires no configuration.
For details on using the instrument remotely, see the Programming Guide.
page 33
page 34
Select the desired language.
This setting is not persistent and is cleared by performing an
instrument Preset. In most cases, it is best to use Utility >
Power On/Preset > Language for a permanent language
change. See
Select On to place a copy of every subsequent SCPI command
executed in the log.
Select Off to stop logging. Selecting Off does not clear the log.
Press the Clear SCPI Log softkey to clear the log.
Select On to view the associated SCPI command for a key press.
page
35.
For details on each key, use key help as described on
Agilent X-Series Signal Generators User's Guide
page
44.
Advertisement
Table of Contents
