Example: Using A Table Editor - Agilent Technologies X Series User Manual

Basic Operation
Entering and Editing Numbers and Text

Example: Using a Table Editor

Table editors simplify configuration tasks. The following procedure describes basic table editor
functionality using the List Mode Values table editor.
1. Preset the signal generator: Press Preset.
2. Open the table editor: Press Sweep > More > Configure List Sweep.
The signal generator displays the editor shown in the following figure.
Active Function Area
Displays the active item as you edit it.
Table Editor Name
Current / Total Number of Pages
3. Highlight the desired item: use the arrow keys or the knob to move the cursor.
4. (Optional) Display the selected item in the active function area: Press Select.
5. Modify the value:
• If the value is displayed in the active function area, use the knob, arrow keys, or numeric
keypad to modify the value.
• If the value is not displayed in the active function area, use the numeric keypad to enter the
desired value (which then appears in the active function area).
6. Terminate the entry:
• If available, press the desired units.
• If units are not displayed, press either Enter (if available) or Select.
The modified item is displayed in the table.
46
Cursor
Highlighting indicates the selected item. To make this the active (editable)
item, either press Select, or simply enter the desired value.
(vector models only)
Table Items
Table items are also Used to load, navigate, modify, and
called data fields. store table item values. For details
on each key, use the key help:
Press the Help hardkey and then
the desired key.
Table Editor Softkeys
Agilent X-Series Signal Generators User's Guide
Indicates that
another menu
is available; to
display the
second menu,
press More.