Configuring The Lan Interface - Agilent Technologies X Series User Manual

Configuring the LAN Interface

Utility > I/O Config
page 34.
NOTES
Use a 100Base–T LAN cable to connect the
signal generator to the LAN.
Use a crossover cable to connect the signal
generator directly to a PC.
For details on using the instrument remotely,
refer to the Programming Guide and to
www.agilent.com and search on FAQs: Hardware
Configurations and Installation for the Agilent
MXG.
Agilent X-Series Signal Generators User's Guide
Values are listed in the
Programming Guide
For details on each key, use key help as described on
Setting Preferences & Enabling Options
Remote Operation Preferences
page 44.
33