Accessing Marker Utilities - Agilent Technologies X Series User Manual

Basic Digital Operation (Option 653/655/656/657)
Using Waveform Markers

Accessing Marker Utilities

Mode > Dual ARB > More > Marker Utilities
Note: This is the
second Arb menu.
page 52
Marker points
on first
sample point
166
The display below shows the I and Q components of the waveform, and
For details on each key, use key help
as described on page
The settings in these menus
can be stored to the file
header, see page
These softkeys change
the range of waveform
sample points shown
on the marker display.
Each press of the
softkey changes the
sample range by
approximately a factor
of two.
Agilent X-Series Signal Generators User's Guide
44.
155.
First sample point
shown on display