Reference Oscillator Tune; Upgrading Firmware - Agilent Technologies X Series User Manual

Signal generators

Hide thumbs Also See for X Series:

Table of Contents

time back. In this case, you can re- enable the signal generator's ability to use time–based licenses by

moving the clock forward to the original time or simply waiting that length of time.

Reference Oscillator Tune

Utility > Instrument Adjustments

For details on each key, use key help

as described on

For information on new firmware releases, go to http://www.agilent.com/find/upgradeassistant.

Agilent X-Series Signal Generators User's Guide

Tunes the internal VCTXCO oscillator frequency.

The user value offsets the factory tuned value (the value is added to the

factory calibrated DAC value). The tune value of 0 sets the factory

calibrated value.

The range; –8192 to 8192, can be set by using the front panel keypad,

knob or remote command.