Simultaneous Modulation
NOTE
The Agilent X- Series signal generators are capable of simultaneous modulation. All
modulation types (AM, FM, φM, Pulse, and I/Q) may be simultaneously enabled, but there are
some exceptions. Refer to
Table 3-1 Simultaneous Modulation Type Combinations
a
AM
AM
- -
FM
c
x
φM
c
x
Pulse
x
I/Q
x
a
Linear AM and Exponential AM cannot be enabled simultaneously. Refer to
b
Pulse modulation requires Option UNW. Refer to
c
FM and φM cannot be enabled simultaneously.
Working with Files
•
File Softkeys
on page 62
•
Viewing a List of Stored Files
•
Storing a File
on page 65
•
Loading (Recalling) a Stored File
•
Moving a File from One Media to Another
•
Working with Instrument State Files
•
Selecting the Default Storage Media
The signal generator recognizes several types of files, such as instrument state files, license files, and
list sweep files. Files can be stored either in the signal generator's internal storage or on the USB
media. This section provides an overview of how to navigate the signal generator's file menus, and
how to view, store, load, and move files.
The Agilent MXG and EXG non- volatile internal memory is allocated according to a Microsoft
compatible file allocation table (FAT) file system. Refer to the Programming Guide.
See also:
Storing, Loading, and Playing a Waveform Segment
Agilent X-Series Signal Generators User's Guide
Table 3-
1.
FM
x
- -
not applicable
not applicable
x
x
Chapter
6.
on page 63
on page 66
on page 68
on page 72
φM
b
Pulse
x
x
x
- -
x
x
- -
x
x
Chapter
4.
on page 67
on page 148.
Basic Operation
Working with Files
I/Q
x
x
x
x
- -
61