Equipment For Interference Fit Mounting - Renishaw TONiC T20 1 Series Installation Manual

Equipment for interference fit mounting

Suitable for:
RESM20 'A' section rings
u
RESM20 'B' section rings
u
Required parts:
Appropriate RESM20 'A' or 'B' section ring
u
('RESM20 installation drawing ('B' section)', page 6)
Appropriate number of screws for ring size
u
('RESM20 installation drawing ('B' section)', page 6)
NOTE: Recommended screw type M3 × 0.5: ISO 4762/DIN 912 grade 10.9 minimum/ANSI B18.3.1M.
Appropriate cleaning solvents ('Storage and handling', page 2)
u
Hex key
u
Green spacer (supplied with TONiC readhead)
u
TONiC RESM20 angle encoder system installation guide
('RESM20 installation drawing ('A' section)', page 5)
('RESM20 installation drawing ('A' section)', page 5)
Optional parts:
or Renishaw scale wipes (A-9523-4040)
u
Lint-free cloth
u
or
11