SOLTEK SL-K8T-939FL Manual
  1. Manuals
  2. Brands
  3. SOLTEK Manuals
  4. Motherboard
  5. SL-K8T-939FL
  6. Manual

SOLTEK SL-K8T-939FL Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Contents
Chapter 1 Specification ............................................. 7
1-1 K8T-939FL Mainboard Layout ..............................................8
1-2 Mainboard Specification Table ..............................................9
1-3 Chipset System Block Diagram ........................................... 10
1-4 Mainboard Specifications and Features ............................. 11
1-4.1 CPU Socket ................................................................................... 11
1-4.2 System Chipsets ........................................................................... 11
1-4.3 Memory ......................................................................................... 11
1-4.4 BIOS ............................................................................................... 11
1-4.6 AC'97 Audio Codec on board .................................................... 12
1-4.7 Advanced System Power Management .................................... 12
1-4.8 IEEE 1394A Interface ................................................................. 12
1-4.9 Multi-I/O Functions .................................................................... 13
1-4.10 SATA / RAID Interface ............................................................. 13
1-4.11 Hardware Monitor on board ................................................... 13
1-4.12 10/100 Ethernet on board ......................................................... 13
1-4.13 Form Factor ................................................................................ 13
Chapter 2 Hardware Setup ..................................... 14
2-1 CPU Installation with Socket 939 ....................................... 15
2-2 Memory Installation ............................................................. 16
2-2.1 To Install DDR SDRAM Module .............................................. 16
2-2.2 Dual Channel Memory Features ............................................... 16
2-2.3 DIMM Powered on ...................................................................... 17
2-3 AGP Slot Installation ............................................................ 17
2-4 IDE Connector Installation ................................................. 18
2-5 SATA / RAID Connectors ..................................................... 19
2-6 Floppy Drive Installation ..................................................... 20
2-7 LED1: Debug LED ................................................................ 21
2-8 ATX Power Supply Installation .......................................... 23
2-9 Jumper Setting ....................................................................... 24
2-9.1 How to tackle the Jumpers: ....................................................... 24
2-9.2 JKB1: Keyboard/Mouse Wake-up ............................................ 25
2-9.3 JBAT1: Clear CMOS .................................................................. 25
Contents
4
Contents

Advertisement

Table of Contents
loading

Related Manuals for SOLTEK SL-K8T-939FL

Summary of Contents for SOLTEK SL-K8T-939FL

  • Page 1: Table Of Contents

    Contents Contents Contents Chapter 1 Specification ..........7 1-1 K8T-939FL Mainboard Layout ..........8 1-2 Mainboard Specification Table ..........9 1-3 Chipset System Block Diagram ........... 10 1-4 Mainboard Specifications and Features ......11 1-4.1 CPU Socket ................... 11 1-4.2 System Chipsets ................11 1-4.3 Memory ..................
  • Page 2 Contents Contents 2-10 Other Connectors Configuration ........26 2-10.1 On-board FAN Connectors ............26 2-10.2 USB Ports and USB Pin-headers ..........27 2-10.3 Chassis Back Panel Connectors ..........28 2-10.4 PS/2 Mouse , PS/2 Keyboard, SPDIF In/Out connector ..28 2-10.5 RJ45 Connector .................
  • Page 3 Contents Contents 4-6.5.1. VIA OnChip IDE Device ............60 4-6.5.2. VIA OnChip PCI Device: ............62 4-6.5.3. Super IO Device: ............... 63 4-6.6 Power Management Setup ............64 4-6.7 PnP / PCI Configuration ............67 4-6.8 SmartDoc Anti-Burn Shield ............69 4-6.9 Frequency/Voltage Control ............

  • Page 4: Chapter 1 Specification

    SL-K8T-939FL Chapter 1 Specification Chapter 1 Specification Introduction This mainboard features an integration of the powerful AMD Athlon 64 939 processors and the North Bridge VIA K8T800Pro plus South Bridge VT8237R, with which the whole system performance supports HyperTransport Bus up to 1GHz.

  • Page 5: K8T-939Fl Mainboard Layout

    SL-K8T-939FL Chapter 1 Specification 1-1 K8T-939FL Mainboard Layout Fan1 Mouse JKB1 Fan4 (on top) PS/2 K/eyboard SPDIF SPDIF IEEE1394 (on top) +12V Power USB port USB port RJ45 (on top) USB port USB port LED2 K8T800 Fan3 VT6103L AGP 8X/4X...

  • Page 6: Mainboard Specification Table

    SL-K8T-939FL Chapter 1 Specification 1-2 Mainboard Specification Table K8T-939FL Specifications and Features Socket 939 for AMD Athlon 64 CPUs North Bridge VIA K8T800Pro, supporting up to 1GHz Hyper Transport South Bridge VIA VT8237R Supporting Dual Channel DDR 400/333/266 Memory SDRAM, up to 4GB in 4 DDR SDIMM slots...

  • Page 7: Chipset System Block Diagram

    SL-K8T-939FL Chapter 1 Specification 1-3 Chipset System Block Diagram Dual Channel Socket 939 System Memory DDR 400/333/ AMD Athlon 64 266 SDRAM HyperTransport Link North Bridge AGP 8X/4X AGP Slot VIA K8T800 8x V-Link 533MB/Sec PCI Bus 5 PCI Slots...

  • Page 8: Mainboard Specifications And Features

    SL-K8T-939FL Chapter 1 Specification 1-4 Mainboard Specifications and Features 1-4.1 CPU Socket CPU Socket 939 on board, supporting AMD Athlon 64 processors, imple- menting up to 1GHz Hyper Transport Speed (System Bus) designed to be capable of operating up to 2000MT/s with a resulting bandwidth of...

  • Page 9: 1-4.5 Accelerated Graphics Port (Agp) Interface

    SL-K8T-939FL Chapter 1 Specification 1-4.5 Accelerated Graphics Port (AGP) Interface AGP Controller embedded on board, supporting: • 1.5V(8X/4X) power mode only, 1 AGP Slot supported • 8X 66MHz AD and SBA signaling; AGP pipelined split-transaction longburst transfers up to 2GB/sec.

  • Page 10: 1-4.9 Multi-I/O Functions

    • Hardware Monitor integrated in LPC I/O IT8705F, providing monitor- ing functions on hardware voltage, temperatures and fan speeds. • Utility Software Soltek Hardware Monitor for displaying monitor sta- tus is enclosed in Support CD for user’s installation. 1-4.12 10/100 Ethernet on board PCI local bus 10/100 Ethernet Controller VT6103L on board: •...

  • Page 11: Chapter 2 Hardware Setup

    SL-K8T-939FL Chapter 2 Hardware Setup Chapter 2 Hardware Setup To Get Things Ready for Hardware Setup ! 1. We recommend to install your CPU before any other components. For detailed installation instructions of processor, you can also refer to the pamphlet enclosed in your CPU package.

  • Page 12: Cpu Installation With Socket 939

    SL-K8T-939FL Chapter 2 Hardware Setup 2-1 CPU Installation with Socket 939 This series is built with CPU Socket 939 supporting the AMD CPUs Athlon 64: 2. Pull up the lever to 1. Socket 939 supported by a release socket lock.

  • Page 13: Memory Installation

    SL-K8T-939FL Chapter 2 Hardware Setup 2-2 Memory Installation 2-2.1 To Install DDR SDRAM Module • Make sure to unplug your Power Supply before adding or removing memory module. Failure to do so may cause severe damage to both your mainboard and the memory module.

  • Page 14: 2-2.3 Dimm Powered On

    SL-K8T-939FL Chapter 2 Hardware Setup 2-2.3 DIMM Powered on • LED2 is designed on board to light Fan1 Mouse JKB1 Fan4 (on top) PS/2 K/eyboard up as soon as DIMM slots are pow- ered on SPDIF SPDIF • When ever LED2 lights up, it indicats...

  • Page 15: Ide Connector Installation

    SL-K8T-939FL Chapter 2 Hardware Setup 2-4 IDE Connector Installation To install IDE Connector, you may connect the blue connector of IDE cable to the primary (IDE1) or secondary (IDE2) connector on board, and then connect the gray connector to your slave device and the black connector to your master device.

  • Page 16: Sata / Raid Connectors

    SL-K8T-939FL Chapter 2 Hardware Setup 2-5 SATA / RAID Connectors 2 Serial ATA connectors for 2 SATA Hard Disks with RAID mode are supported by the South Bridge VIA VT8237R. Please see Chapter 5 Disk Array Installation for detail RAID installaion.

  • Page 17: Floppy Drive Installation

    SL-K8T-939FL Chapter 2 Hardware Setup 2-6 Floppy Drive Installation To install Floppy Drive, you should connect the end of Floppy Drive cable with single connector to the board, and connect the other end with two connectors to the floppy drives.

  • Page 18: Led1: Debug Led

    SL-K8T-939FL Chapter 2 Hardware Setup 2-7 LED1: Debug LED A Debug LED is built in on board to display various digital messages which stand for the running status of the mainboard. Fan1 Mouse JKB1 Fan4 (on top) PS/2 K/eyboard SPDIF...
  • Page 19 SL-K8T-939FL Chapter 2 Hardware Setup Code Post Routine Description Turn off chipset and CPU test First block memory detect Early initialize the Super I/O Initialize Mouse Initialize onboard audio controller Check CMOS circuitry and reset CMOS Video memory test Setup PS/2 Mouse and reset KB...

  • Page 20: Atx Power Supply Installation

    SL-K8T-939FL Chapter 2 Hardware Setup 2-8 ATX Power Supply Installation Main Power Connector Fan1 Mouse JKB1 Fan4 (on top) PS/2 K/eyboard +12V PWR OK SPDIF SPDIF IEEE1394 (on top) +12V Power USB port USB port RJ45 (on top) PS ON#...

  • Page 21: Jumper Setting

    SL-K8T-939FL Chapter 2 Hardware Setup 2-9 Jumper Setting 2-9.1 How to tackle the Jumpers: A 2-pin Jumper A 3-pin Jumper If a pin-header (of 2 or more pins) is designed in such a way that its pins can be closed or linked together to...

  • Page 22: 2-9.2 Jkb1: Keyboard/Mouse Wake-Up

    SL-K8T-939FL Chapter 2 Hardware Setup The following diagrams show the locations and settings of jumpers on the mainboard. 2-9.2 JKB1: Keyboard/Mouse Wake-up JKB1 is designed to enable / disable the PS/2 Keyboard or PS/2 Mouse Wake-up JKB1 (from suspend mode). Setting JKB1 to...

  • Page 23: Other Connectors Configuration

    SL-K8T-939FL Chapter 2 Hardware Setup 2-10 Other Connectors Configuration This section lists out all connectors configurations for users’ reference. 2-10.1 On-board FAN Connectors Fan1 Mouse JKB1 Fan4 Void (on top) PS/2 K/eyboard Sensor +12V +12V SPDIF SPDIF IEEE1394 (on top)

  • Page 24: 2-10.2 Usb Ports And Usb Pin-Headers

    SL-K8T-939FL Chapter 2 Hardware Setup 2-10.2 USB Ports and USB Pin-headers This series provides 4 USB ports on board supporting various USB devices. In addition, 2 USB pin-headers are added on board to provide expansion of 4 more optional USB ports by using 2 additional USB Cables.

  • Page 25: 2-10.3 Chassis Back Panel Connectors

    SL-K8T-939FL Chapter 2 Hardware Setup 2-10.3 Chassis Back Panel Connectors K(middle) L(bottom) A : PS/2 Mouse J : 2 USB ports B : COM1 Connector K : Line Out /Front Speaker C : S/PDIF In D : S/PDIF Out L : Microphone Input...

  • Page 26: 2-10.5 Rj45 Connector

    SL-K8T-939FL Chapter 2 Hardware Setup 2-10.5 RJ45 Connector One RJ45 connector is on board for LAN connection, supporting 10/ 100Mb (1000Mb is for 1G LAN interface) data transfer. Orange LED blinks to indicate Yellow LED “On” to indicate that data transmission is...

  • Page 27: 2-10.7 Thermal Detectors

    SL-K8T-939FL Chapter 2 Hardware Setup 2-10.7 Thermal Detectors Fan1 Mouse JKB1 Fan4 (on top) PS/2 K/eyboard SPDIF SPDIF IEEE1394 (on top) +12V Power USB port USB port RJ45 (on top) USB port USB port LED2 K8T800 Fan3 VT6103L AGP 8X/4X...

  • Page 28: 2-10.9 Complex Pin-Header (Front Panel Connectors)

    SL-K8T-939FL Chapter 2 Hardware Setup 2-10.9 Complex Pin-header (Front Panel Connectors) This complex Pin-header consists of the following connectors for vari- ous front panel supports. When you have fixed the mainboard to the case, join the connectors of this Complex Pin-header to the case Front Panel.

  • Page 29: 2-10.10 Ieee 1394A Port/Pin-Header

    SL-K8T-939FL Chapter 2 Hardware Setup 2-10.10 IEEE 1394a Port/Pin-header One IEEE1394a Port is built on board for Digital Video Cameras and other devices with 1394a interface. Another IEEE 1394a Pin-header is built on board providing one more 1394a channel on the front Panel.

  • Page 30: 2-10.11 Printer Port: Ltp1

    SL-K8T-939FL Chapter 2 Hardware Setup 2-10.11 Printer Port: LTP1 LTP1 is a parallel printer port. Fan1 Mouse JKB1 Fan4 (on top) PS/2 K/eyboard LTP1: Printer Port Pin Assignment SPDIF SPDIF Pin 1 STROBE# Pin 14 AUTOFD# IEEE1394 Pin 2 LPTDD0...

  • Page 31: Chapter 3 Software Setup

    SL-K8T-939FL Chapter 3 Software Setup Chapter 3 Software Setup Drivers, Utilities and Software Installation Support CD: This mainboard will be shipped with a Support CD which contains those necessary driver files, Application Softwares and some helpful utilities. It is a user-friendly, auto-run CD which will open itself up in a CD-ROM automatically.

  • Page 32: To Open Up Support Cd

    SL-K8T-939FL Chapter 3 Software Setup 3-1 To Open Up Support CD: 1. Please put the Support CD enclosed in your mainboard package into the CD-ROM drive. In a few seconds, the Main Menu will automatically appear, displaying the contents to be installed for this series: 2.

  • Page 33: Via 4-In-1 Drivers Installation

    SL-K8T-939FL Chapter 3 Software Setup 3-2 VIA 4-IN-1 Drivers Installation 1. Following the procedures of opening the Support CD, click to “ VIA 4- in-1 Drivers” to proceed. 3. “VIA Service Pack README” 2 . T h e V I A S e r v i c e P a c k...
  • Page 34 SL-K8T-939FL Chapter 3 Software Setup 6. Select “Install VIA PCI IDE 7. Select “Install VIA AGP Driver” Driver” checkbox, then click the in turbo mode and press “Next” “Next” button to continue. button to continue. Next Next 8. After all these setup procedures have finished, you should restart your computer by clicking on “OK”...

  • Page 35: Usb 2.0 Driver Installation

    SL-K8T-939FL Chapter 3 Software Setup 3-3 USB 2.0 Driver installation VIA USB V2.0 is already integrated on board. Its 480Mb/s transfer rate supports operating systems Windows 98SE/ME/2000/XP. USB2.0 Driver is typically for Windows 98SE/ME. For Windows 2000/XP, users can install their latest Service Pack instead of the USB2.0 driver to gain the USB2.0 support.
  • Page 36 SL-K8T-939FL Chapter 3 Software Setup 3. Instantly, next screen will pop up to prompt you to select component. Select “Install USB Driver” and click “Next” button to continue. Next 4. The USB 2.0 Setup Program will then guide you through the whole driver setup until the “Finish”...

  • Page 37: Ac'97 Audio Driver Installation

    SL-K8T-939FL Chapter 3 Software Setup 3-4 AC’97 Audio Driver Installation RTL ALC850 8-channel AC97 Audio Codec on board, AC’97 2.3 compat- ible stereo audio code for PC multimedia systems. AC’97 Audio Codec Driver is provided in Support CD for user’s installation.

  • Page 38: 3-4.2 Verifying 8-Channel Audio

    SL-K8T-939FL Chapter 3 Software Setup 3-4.2 Verifying 8-channel Audio After installation of AC’97 8-channel Codec, you must configure the 7.1 Speaker connection to enable the 8-channel audio. 1. Connect your on-board Audio Connector to your 8-channel speakers as depicted in the figure below:...
  • Page 39 SL-K8T-939FL Chapter 3 Software Setup 3. The AC’97 Audio Configuration” screen will pop out. Clikc the “Speaker Configuration” bar with your mouse. 4. Instantly, the “Speaker Configuration” screen will pop out. Pick the items “8-channelSpeaker” and then click on the Auto Test button.

  • Page 40: Lan Driver Installation

    SL-K8T-939FL Chapter 3 Software Setup 3-5 LAN Driver Installation 3-5.1 Installation 1. Following the procedures of opening the Support CD, click to “ Onboard LAN Driver” to proceed. 2. Instantly, “The installation is completed” screen appears, indicating that LAN Driver setup is finished.

  • Page 41: Install Hardware Monitor Utility

    SL-K8T-939FL Chapter 3 Software Setup 3-6 Install Hardware Monitor Utility 3-6.1 Installation Hardware Monitor is built on this mainboard. Its installation is pro- grammed to a fully automated mode on Windows 9X/Me/NT4/2000/ XP. Users can follow the model installation below for its installation on various Windows System.

  • Page 42: 3-6.2 Verification

    SL-K8T-939FL Chapter 3 Software Setup 3-6.2 Verification 1. After installing Soltek Hardware Monitor, double click “SoltekHM” icon on the desktop to open the main window of the Soltek Hardware Doctor. 2.Then the pop-up screen will show all information about CPU Temperature, Fan Speed and various Voltages.

  • Page 43: Chapter 4 Bios Setup

    SL-K8T-939FL Chapter 4 BIOS Setup Chapter 4 BIOS Setup THE BIOS BIOS stands for Basic Input and Output System. It was once called ROM BIOS when it was stored in a Read-Only Memory(ROM) chip Now manufacturers would like to store BIOS in EEPROM which means Electrically Erasable Programmable Memory.

  • Page 44: About Bios Setup

    SL-K8T-939FL Chapter 4 BIOS Setup 4-1 About BIOS Setup BIOS setup is an interactive BIOS program that you need to run when: 1. Changing the hardware of your system. (For example: installing a new Hard Disk etc.) 2. Modifying the behavior of your computer. (For example: changing the system time or date, or turning special features on or off etc.)

  • Page 45: To Update Bios

    • Please follow the steps below for updating the system BIOS: Step 1. Please visit Soltek website: www.soltek.com.tw, download the .zip file of the latest BIOS into your hard disk, and then decompress it into a Floppy disk. The decompressed files are (1) .exe file(execution file), (2) BIOS file, (3) Readme file.
  • Page 46 SL-K8T-939FL Chapter 4 BIOS Setup BIOS Update Illustration: (1) Executing the “awdflash.exe k8AV2008.bin” in DOS system, Award Flash Memory Writer Start Screen appears: To input BIOS file name. AwardBIOS Flash Utility V8.24F (C)Phoenix Technologies Ltd. All Rights Reserved For K8T800-8237-6A7L0SAAC-00 Date: 09/18/2003 File Name to Program : K8AV2008.BIN...
  • Page 47 SL-K8T-939FL Chapter 4 BIOS Setup (4) Updating is in progress. Do not turn off power at this moment. AwardBIOS Flash Utility V8.24F (C)Phoenix Technologies Ltd. All Rights Reserved For K8T800-8237-6A7L0SAAC-00 Date: 09/18/2003 Flash Type - SST 39SF020 /5V File Name to Program : k8av2008.bin...

  • Page 48: Bios Setup

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6 BIOS SETUP --- CMOS Setup Utility Warning and Tips: If changing CMOS Configuration causes difficulty in rebooting system, you can take the following measures: 1. At pressing the power button to reboot, press the “Insert” key at the same time.
  • Page 49 SL-K8T-939FL Chapter 4 BIOS Setup 3. When one main item of the Main Menu is chosen and clicked on, its submenu will appear to display the related items and options. On the other hand, a list of operation guide will appear at the end of the...

  • Page 50: 4-6.2 Standard Cmos Setup

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.2 Standard CMOS Setup Standard CMOS Setup records some basic system hardware configuration and sets the system clock and error handling. You only need to modify the configuration values of this option if you want to change your system hardware configuration or when the data stored in the CMOS memory gets lost or damaged.
  • Page 51 SL-K8T-939FL Chapter 4 BIOS Setup Channel 0 / Channel 1 This field records the specifications for all non-SCSI Master / Slave hard disk drives installed in your system. Refer to the respective documentation on how to install the drives. Phoenix - AwardBIOS CMOS Setup Utility...

  • Page 52: 4-6.3 Advanced Bios Features

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.3 Advanced BIOS Features Advanced BIOS Features improves your system performance or sets up system features according to your preference. Run the Advanced BIOS Features as follows: Choose “Advanced BIOS Features” from the Main Menu and a screen...
  • Page 53 SL-K8T-939FL Chapter 4 BIOS Setup Virus Warning If enabled, BIOS will show a warning message on screen whenever anyone attempts to write data into HDD boot sector. CPU Internal / External Cache memory is additional memory that is much Cache faster than conventional DRAM (system memory).
  • Page 54 SL-K8T-939FL Chapter 4 BIOS Setup Boot Up NumLock Toggle between On or Off to control the state of Status the NumLock key when the system boots. If On, the numeric keypad is in numeric mode. If off, the numeric keypad is in cursor control mode.

  • Page 55: 4-6.4 Advanced Chipset Features

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.4 Advanced Chipset Features Choose “Advanced Chipset Features” from the Main Menu and a list of option will appear: Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features Item Help AGP & P2P Bridge Control...
  • Page 56 SL-K8T-939FL Chapter 4 BIOS Setup DRAM Configuration: To press< Enter > on DRAM Configuration will reveal the following item(s). Current FSB Frequency BIOS shows the actual Front Side Bus frequency. Current DRAM Frequency BIOS shows the actual DRAM frequency. Max Memclock (Mhz) To manually set the memory clock if you have set “by manual”...

  • Page 57: 4-6.5 Integrated Peripherals

    SL-K8T-939FL Chapter 4 BIOS Setup Memory Hole To enabled / disabled (default) the support of Memory Hole which is reserved for ISA card. Choices: Disabled; 15MB-16MB VLink Data Rate To set VLink Data Rate. Choices: 8X; 4X Init Display First Initialize the AGP video display before initializing any other display device on the system.
  • Page 58 SL-K8T-939FL Chapter 4 BIOS Setup VIA OnChip IDE Device: To press< Enter > on VIA OnChip IDE Device will reveal following item. OnChip SATA To enable/disable the SATA interface. SATA Mode To select the SATA Mode. Choices: IDE; RAID IDE DMA transfer...

  • Page 59: 4-6.5.2. Via Onchip Pci Device

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.5.2. VIA OnChip PCI Device: To press< Enter > on VIA OnChip PCI Device will reveal the following item(s). Item Help AC97 Audio Enabled 1394 Enabled Enabled OnChip USB Controller All Enabled OnChip EHCI Controller...

  • Page 60: 4-6.5.3. Super Io Device

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.5.3. Super IO Device: To press< Enter > on Super IO Device will reveal the following items. Item Help Onboard FDC Controller Enabled Onboard Serial Port 1 Auto Onboard Serial Port 2 Auto UART Mode Select...

  • Page 61: 4-6.6 Power Management Setup

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.6 Power Management Setup Power Management Setup allows you to set the system’s power saving functions. Run the Power Management Setup as follows: Choose “Power Management Setup” from the Main Menu and a list of...
  • Page 62 SL-K8T-939FL Chapter 4 BIOS Setup HDD Power Down When enabled after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active. Suspend Mode When enabled after the set time of system inactivity, the whole system will be suspended.
  • Page 63 SL-K8T-939FL Chapter 4 BIOS Setup IRQ/Event Activity Detect: To press< Enter > on IRQ/Event Activity Detect will reveal following items. PS2KB Wakeup Select To select the PS/2 KB Wake-up mode. Choices: Hot key; Password PS2KB/Ms Wakeup To set the hot key to wake up the system by PS/2 from S3/S4/S5 KB/Ms from S3/S4/S5.

  • Page 64: 4-6.7 Pnp / Pci Configuration

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.7 PnP / PCI Configuration PnP/PCI Configuration allows you to modify the system’s power saving functions. Run the PnP/PCI Configuration as follows: Choose “PnP/PCI Configuration” from the Main Menu and a screen with a list of options will appear:...
  • Page 65 SL-K8T-939FL Chapter 4 BIOS Setup PNP OS Installed Allows you to configure the PNP devices by BIOS or O/S. Choices: No(by BIOS); Yes(by O/S) Reset Configuration Normally, you leave this Disabled(default). Select Data Enabled to reset Extended System Configuration Data (ESCD), when you exit Setup if you have in-...

  • Page 66: 4-6.8 Smartdoc Anti-Burn Shield

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.8 SmartDoc Anti-Burn Shield This section helps you to get more information about your system in- cluding CPU temperature, FAN speed and voltage. It is recommended that you contact your mainboard supplier to get proper values about the setting of the CPU temperature.

  • Page 67: 4-6.9 Frequency/Voltage Control

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.9 Frequency/Voltage Control Choose “Frequency/Voltage Control” from the Main Menu and a screen with a list of options will appear: Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control Item Help CPU Ratio StartUp Auto Detect PCI Clk...

  • Page 68: 4-6.10 Load Optimized Defaults

    SL-K8T-939FL Chapter 4 BIOS Setup 4-6.10 Load Optimized Defaults When you press <Enter> on this item, you will get a confirmation dialog box with a message similar to: “ Load Optimized Defaults (Y / N) ? N ” Phoenix - AwardBIOS CMOS Setup Utility...

  • Page 69: 4-6.12 Save & Exit Setup

    SL-K8T-939FL Chapter 4 BIOS Setup 2. The first time you run this option, enter your password up to 8 char- acters and press <Enter>. (The screen does not display the entered characters.) 3. After you enter the password, the following message appears prompt- ing you to confirm the password: “Confirm Password :...

Table of Contents