To Enter Via Tech. Raid Bios Setup - SOLTEK K8AV2-R Manual

5-3 To Enter VIA Tech. RAID BIOS Setup

Reboot the K8AV2-R/K8AV2-RL system with "RAID Interface" enabled
in system BIOS Setup and watch for the following initial screen to appear:
VIA Technologies, Inc. VIA VT6420 RAID BIOS Setting Utility v (xxx)
Copyright (C) VIA Technologies, Inc. All right reserved.
Press < Tab > key into User Windows!
Scan Devices, please wait ....
Channel 0 Master: ST3120023AS
Channel 1 Master: ST380023AS
(The above message indicates that the SATA hard disks on board
are detected by the RAID BIOS.)
As soon as the above screen appears, press < Tab > key to enter VIA
Tech. RAID BIOS Setup.
In a few seconds, the VIA Tech. RAID BIOS Setup Utility appears as
shown below:
Press <Enter> to create Array.
Chapter 5 SATA RAID Setup
The Hard Disks connected to
SATA connectors are detected by
RAID BIOS.
87