To Enter Via Tech. Raid Bios Setup - SOLTEK SL-85ERV4-R Manual

SL-85ERV4-R / 85ERV4-RL

5-3 To Enter VIA Tech. RAID BIOS Setup

Reboot the system with "OnChip SATA/RAID" enabled in system BIOS
Setup and watch for the following initial screen to appear:
VIA Technologies, Inc. VIA VT8237 Serial RAID BIOS Setting Utility
V2.10 Copyright (C) VIA Technologies, Inc. All right reserved.
Scan Devices, Please wait ....
Press < Tab > key into User Window!
Channel 0 Master: ST380023AS
Channel 1 Master: ST380023AS
(The above message indicates that the SATA hard disks on board are
detected by the RAID BIOS.)
As soon as the above screen appears, press < Tab > key to enter VIA
Tech. RAID BIOS Setup.
In a few seconds, the VIA Tech. RAID BIOS Setup Utility appears as
shown below:
Press <Enter> to create Array.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.10
Create Array
Delete Array
Create/Delete
Spare
Select Boot Array
Serial Number View
Channel
Channel0 Master
Channel0 Slave
Channel1 Master
Channel1 Slave
Drive Name Array Name
ST380023AS
No Drive
ST380023AS
No Drive
The Hard Disks connected to
SATA connectors are detected by
RAID BIOS.
Chapter 5 VIA VT8237 RAID
Create A RAID array with the
hard disks attatched to VIA RAID
controller
F1 : View Array/disk Status
: Move to next item
Enter : Confirm the selection
ESC : Exit
Mode
ATA 133
ATA 133
78
Size(GB) Status
74.53 Hdd
74.53 Hdd