4-6.7.4 Change User Password; 4-6.7.5 Clear User Password - SOLTEK 86SP2 Manual

4-6.7.4 Change User Password

This option allows you to set a new User password for the system:
1. Choose "Change User Password" in the "BIOS Security Features"
and press <Enter>. Then the following message appears:
2. The first time you run this option, enter your password up to 6 char-
acters and press <Enter>. (The screen does not display the entered
characters.)
3. After you enter the password, the following message appears, prompt-
ing you to confirm the password:
4. Enter the same password "exactly" the same as you have just typed
to confirm the password and press <Enter>.
5. The following message appears to confirm the new password setup.
6. Then press any key to continue your CMOS Setup. To save the pass-
word setup, you should press "Save Changes and Exit" and choose
"OK" to exit and save setup.

4-6.7.5 Clear User Password

1. To remove the current user password, choose "Clear User Password"
and press <Enter>. An instruction box appears on the screen, assur-
ing to clear User Password:
2. Then choose [OK] and press <Enter>. The User Password is suc-
cessfully removed.
[ Enter New Password ]
[ Confirm New Password ]
[ Password installed ]
[OK]
Clear User Password?
[OK] [Cancel]
85
Chapter 4 BIOS Setup