4-6.10 Load Optimized Defaults; 4-6.11 Set Supervisor / User Password - SOLTEK SL-K8T-939FL Manual

Table of Contents

Advertisement

SL-K8T-939FL

4-6.10 Load Optimized Defaults

When you press <Enter> on this item, you will get a confirmation dialog
box with a message similar to:
" Load Optimized Defaults
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power management Setup
PnP/PCI Configurations
SmartDoc Anti-Burn Shield
Esc: Quit
F10: Save & Exit Setup
"Y" is for "Yes", and "N" is for "No".
Pressing "Y" loads the BIOS Optimized default values to restore the
BIOS to its original status.

4-6.11 SET SUPERVISOR / USER PASSWORD

These two options allow you to set your system passwords. Normally,
the supervisor has a higher priority to change the CMOS setup option
than the users. The way to set up the passwords for both Supervisor
and Users are as follows:
1. Choose "Change Password" in the Main Menu and press <Enter>.
Then following message appears:
Phoenix - AwardBIOS CMOS Setup Utility
Load Optimized Defaults [Y/N] Y
Load Optimized Defaults
"Enter Password :
(Y / N) ?
Frequence/Voltage Control
Load Optimized Defaults
Set Supervisor Password
Set User Passward
Save & Exit Setup
Exit Without Saving
"
71
Chapter 4 BIOS Setup
N "
: Select Item

Advertisement

Table of Contents
loading

Table of Contents